As a rolling mill gripping shear manufacturer, we are equipped with a famous factory and plant and engineers with decades experience. Our company also provide CCM Machine, TMT Re-bar Mill, Wire Rod Mill, finishing mill, rolling mill stand, hot rolling mill, section rolling mill, etc.for sale, welcome to visit and check the process and layout with Xi’an Hani Tech Co., Ltd.
The Function of the Rolling Mill Gripping Shear:
The rolling mill gripping shear is located in the entrance of the pre-finishing mill and finishing mill. It is used to protect the pre-finishing mill and finishing mill by cutting off the rolled piece and stop further feeding into the mill once there is an operation failure.
Equipment composition and structural characteristics:
The rolling mill gripping shear is composed of a support base, the main machine of cutting and cylinder. The cutting machine is two spindles stuck shear controlled by pneumatic, the one is on top of rolling parts and the other is under the rolling parts. When the accident occurs, cylinder moved through the closed sword by promote upper and lower connecting rod, these two swords connected with the moving rolling part and cut down it.
The support base of rolling mill gripping shear is weld structure.
Lubrication and air compression:
The frame axis of gripping shear adapt oil bearing, the others used manual glycerol lubrication to offer the oil regularly.
The compressed air used in the cylinder of the gripping shearing machine is supplied by the workshop, the pressure is 0.4~0.6Mpa.
Main Technical Performance of Rolling Mill Gripping Shear:
Shearing steel type: General Carbon Steel, Low-alloy steel
Shearing temperature: 850℃
Shearing cylinder: Φ100/Φ32×240
Cylinder working pressure: 0.4~0.6MPa
Gripping Shear Data Table
As a professional rolling mill shearing machine manufacturer in China, we can supply designing, manufacturing, installation, and commissioning of the equipment with “turn-key” service. We can supply all kinds of shearing machine, including flying shearing machine, chopping shearing machine and gripping shearing machine.
|
Item classification(m/s) |
||||
| Specification | Shearing temperature(℃) | Rolled piece speed (m/s) | Shear diameter(mm) | Weight(T) |
| 50 | 45 | 5 | ||
| 65 | 55 | 9~12 | 13~21 | 0.76 |
| 84 | 105 | 6.4~12 | ||
| 135 | 125 | 6~16 | ||
