Compared with the hot roll, the cold roll only rolls the cold-rolled piece, which is usually cast after smelting and often needs to be forged. With the development of casting technology, the cold roll is forged. It is being implemented continuously. The cold roll has a cold rolling work roll, […]
What is a Cold Roll? Keep Reading »
Main Process and Technical Features of Continuous Billet Caster The technological features of the round billet continuous caster mainly include the following aspects: First, the radius of the arc is 13 meters. Because the size of the arc radius can be directly matched with a variety of different
Technological Features of Continuous Billet Caster Keep Reading »
What are the Advantages and Disadvantages of Blast Furnace? Blast Furnace Ironmaking Advantages: 1. Continuous feeding, continuous tapping, suitable for large-scale continuous production; 2. Low power requirements; 3. The product is further processed (continuous casting and rolling) with good performance. 4. Mature technology and low production cost. 5. High
What are the Advantages and Disadvantages of Blast Furnace? Keep Reading »
For the cardan shaft, there are corresponding requirements in the angle of operation, generally speaking, the angle needs to be less than 90 degrees. Because the simpler construction operation can know that the swing angle of the cardan shaft is just right at 90 degrees, and when the cardan
Analysis of the Swing Angle of Cardan Shaft in Operation Keep Reading »
In the use of Cardan Shafts, relative to the shrinkable cardan shaft with its own keys, when assembling, the need for spline shaft and sleeve place contrast. It is also good to confirm that the relative difference between the bearings on both sides is less than 1 degree, otherwise,
Cardan Shafts Assembly and Daily Maintenance Keep Reading »
