Medium frequency smelting furnace is mainly used for welding (brazing, silver welding, copper welding), hot forging, hot matching, surface quenching, annealing of various stainless steel industries, metal smelting, etc. For medium frequency smelting furnace, the induction coil is a part of the furnace body. So if the induction ring of […]
In the use of cardan shaft, compared with the cardan shaft that can shrink and has its own key, the spline shaft and sleeve place are mutually contrasted during assembly. In this way, it can also be confirmed that the relative difference between the bearings on both sides is less
Cardan Shaft Assembly and Routine Maintenance Keep Reading »
Difference Between Push-steel Reheating Furnace and Walking Beam Reheating Furnace Push-type continuous reheating furnace relies on the pusher to complete the task of conveying material in the furnace. The billet slides on the bottom of the reheating furnace or on a slide supported by a water-cooled tube. In
Walking Beam Reheating Furnace VS Push-steel Reheating Furnace Keep Reading »
The horizontal continuous casting machine’s crystallizer, secondary cooling zone, tension leveler, cutting equipment and other equipment are in the horizontal orientation, and the center package is closely connected with the crystallizer. The center water inlet is connected to the crystallizer and has a separate ring. When the blank is drawn,
Continuous Casting Machine Keep Reading »
The induction furnace with frequency in the range of 150-10000 Hz is called an intermediate frequency furnace. The complete equipment of medium frequency induction furnace includes power supply and electrical control part, furnace body part, transmission device, and water cooling system. The intermediate frequency furnace is especially suitable for
Why Intermediate Frequency Furnace cannot be Turned on Normally? Keep Reading »
