What are the Advantages and Disadvantages of Blast Furnace? Blast Furnace Ironmaking Advantages: 1. Continuous feeding, continuous tapping, suitable for large-scale continuous production; 2. Low power requirements; 3. The product is further processed (continuous casting and rolling) with good performance. 4. Mature technology and low production cost. 5. High […]
What are the Advantages and Disadvantages of Blast Furnace? Keep Reading »
For the cardan shaft, there are corresponding requirements in the angle of operation, generally speaking, the angle needs to be less than 90 degrees. Because the simpler construction operation can know that the swing angle of the cardan shaft is just right at 90 degrees, and when the cardan
Analysis of the Swing Angle of Cardan Shaft in Operation Keep Reading »
In the use of Cardan Shafts, relative to the shrinkable cardan shaft with its own keys, when assembling, the need for spline shaft and sleeve place contrast. It is also good to confirm that the relative difference between the bearings on both sides is less than 1 degree, otherwise,
Cardan Shafts Assembly and Daily Maintenance Keep Reading »
Electric arc furnace steelmaking mainly uses arc heat, and the temperature in the arc action zone is as high as 4000 °C. The smelting process is generally divided into a melting period, an oxidation period and a reduction period. In the furnace, not only an oxidizing atmosphere but also a
Characteristics of Electric Arc Furnace Steelmaking Keep Reading »
Different Properties of 2 Hi Rolling Mill and 4 Hi Rolling Mill Many friends don’t know what a 4 Hi Rolling Mill is. In fact, el 4 hi rolling mill is a combination of two working rolls and two supporting rolls. It is not only the drive mechanism for
What is the Difference Between a 2 Hi Rolling Mill and a 4 Hi Rolling Mill? Keep Reading »
