Difference Between Push-steel Reheating Furnace and Walking Beam Reheating Furnace Push-type continuous reheating furnace relies on the pusher to complete the task of conveying material in the furnace. The billet slides on the bottom of the reheating furnace or on a slide supported by a water-cooled tube. In […]
Walking Beam Reheating Furnace VS Push-steel Reheating Furnace Continuez à lire »
The horizontal continuous casting machine’s crystallizer, secondary cooling zone, tension leveler, cutting equipment and other equipment are in the horizontal orientation, and the center package is closely connected with the crystallizer. The center water inlet is connected to the crystallizer and has a separate ring. When the blank is drawn,
Machine de coulée continue Continuez à lire »
The induction furnace with frequency in the range of 150-10000 Hz is called an intermediate frequency furnace. The complete equipment of medium frequency induction furnace includes power supply and electrical control part, furnace body part, transmission device, and water cooling system. The intermediate frequency furnace is especially suitable for
Pourquoi le four à fréquence intermédiaire ne peut pas être allumé normalement? Continuez à lire »
Le modèle de laminoir à fil machine à grande vitesse est principalement le laminoir de la série Morgan, et le plus haut devrait être Morgan 6. Processus de production: système de déformation, système de vitesse, système de température. Matières premières: les produits du laminoir à fil machine à grande vitesse peuvent être fabriqués à partir de φ 5.5 à φ
Moulin à fil machine Morgan Continuez à lire »
Compared with the hot roll, the cold roll only rolls the cold-rolled piece, which is usually cast after smelting and often needs to be forged. With the development of casting technology, the cold roll is forged. It is being implemented continuously. The cold roll has a cold rolling work roll,
Qu'est-ce qu'un rouleau à froid? Continuez à lire »
