As a professional China Medium Frequency Induction Melting Furnace manufacturer, we are equipped with a famous factory and plant and engineers with decades experience, as well as providing with Electric Arc Furnace, Induction Heating Furnace, CCM Machine, TMT Re-bar Mill, Wire Rod Mill, finishing mill, reversible rolling mill, cold rolling mill, section rolling mill, etc. for sale, welcome to visit and check the process and layout with Xi’an Hani Tech Co., Ltd.
Environment and Condition Usage of Medium Frequency Induction Melting Furnace
1. The temperature should be at 2℃ to 35℃.
2. The relative humidity no more than 90%
3. Installation height no more than 1000m
4. No conductive dust and corrosive gas in working place.
5. No explosion and violent vibration room around the place
6. The temperature of the cooling water should no less than 10℃, not more than 30℃, hardness<8 degrees, Ph<degrees, pressure=”>0.2Mpa.
7. The power supply must be at 50Hz, three phases, 380V, Voltage fluctuation 370-410Volts.
Instruction of Medium Frequency Induction Melting Furnace Overview
This equipment is composed of furnace body, tilting controller, water cooled cable, capacitor, medium frequency, water cooling plant.
1. Furnace Body
Furnace structure has four types, aluminum reduction tilting furnace, aluminum hydraulicking furnace, magnetic shielding steel furnace and hydraulic steel furnace reduction tilting furnaces equip with reduction machine, hydraulic tilting furnaces equipped with hydraulic pump and work station. The whole sets generally have two furnaces using for melting and maintenance.
Induction coil installs in the center of the furnace, it has a spiral body with the rectangular empty brass circle around, the pipe center should be cooled with water. Copper bar outside the induction coil will connect with the water-cooling cable. The lining closest to the induction coil, which made by the burden, the method you can find in related parts below
2. Tilting Controller
The controller is a control box for tilting furnace. The switch on the controller can choose furnaces and the button can move around through the rubber soft line, and also control the furnace for tilting and be resetting(this part should be installed by users themselves)
3. Water-cooled cable
Water cooled cable is made of soft copper wire, hose, cable end, through them to connect with capacitor and furnace.
4. Capacitors
Capacitors compose of electric heat, holder, the converge-wires. it supplies power.
5. Medium Frequency power cabinet
Medium frequency power cabinet will transmute three-phase AC power frequency into medium AC power.
6. Water-cooling plant(Prepared by the user)
Water cooling plant includes water inlet and outlet water tank, it supplies for an induction coil. water-cooled electric cable and cooling water in the capacitor can be divided into five ways, usually using only three ways(once melting furnace doesn’t work the water in the induction coils and cooling cable can be close down through the valve).
Environment and condition usage
1. The temperature should be at 2℃ to 35℃.
2. The relative humidity no more than 90%
3. Installation height no more than 1000m
4. No conductive dust and corrosive gas in working place.
5. No explosion and violent vibration room around the place
6. The temperature of the cooling water should no less than 10℃, not more than 30℃, hardness<8 degrees, Ph<degrees, pressure=”>0.2Mpa.
7. The power supply must be at 50Hz, three phase, 380V, Voltage fluctuation 370-410Volts.
