Product Quality Defect Common defects on the surface of bar and wire rod 1.1 Defects in raw materials 1.1.1 Shrinkage cavity—There are residual shrinkage cavities and the resulting defects in the steel. Reason: ① Shrinkage hole occurred during pouring. ② There are oxides and slag. 1.1.2 […]
العيوب الشائعة وطرق العلاج على سطح القضبان والقضبان السلكية تابع القراءة »
Electric Furnace The electric furnace steelmaking process mainly uses arc heat, ودرجة الحرارة تصل إلى 4000 ℃ في منطقة عمل القوس. تنقسم عملية الصهر عمومًا إلى فترة الصهر, فترة الأكسدة, وفترة التخفيض. في الفرن, not only an oxidation atmosphere but also
مقارنة الفرن الكهربائي, فرن AOD, فرن LF وفرن الفراغ VD تابع القراءة »
The industrial frequency induction furnace is an induction furnace with an industrial frequency current (50 أو 60 Hz) as the power source. The industrial frequency induction furnace has been developed into smelting equipment with a wide range of uses. It is mainly used as a melting furnace to smelt gray
فرن الحث بالتردد الصناعي تابع القراءة »
Steel Rebar Rolling Mill Process Flow The Steel Rebar Rolling Mill Process Flow is as follows: Steel billet acceptance → heating → rolling → double-length shearing → cooling → shearing → inspection → packaging → measurement → storage Billet Acceptance Billet acceptance: The quality of the billet is the
Steel Rebar Rolling Mill Process Flow تابع القراءة »
The leak detection of the induction furnace is a barrier to ensure the safe use of the intermediate frequency furnace. It is located between the furnace coil and the furnace lining. When the molten steel penetrates into the furnace lining, an alarm will be generated in time to warn the
Leakage Detection of the Induction Furnace تابع القراءة »
