Safety Management Responsibilities and Hazard Identification in Steel Enterprises Abstract: An essential guide for metallurgical leaders on safety production duties, fund allocation, and the identification of major hazard sources in steel production facilities. أنا. Primary Safety Responsibilities of Corporate Leaders The main person in charge of a steel enterprise holds […]
Professional Operating Procedures for Centrifugal Pump Maintenance Ensuring operational stability and equipment longevity in metallurgical facilities. أنا. بروتوكولات ما قبل التشغيل وبدء التشغيل 1. التحقق من الضغط: تأكد من أن ضغط المدخل أكبر من 1 حاجِز (100جيد / 0.1 ميجا باسكال) قبل العملية. 2. فحص الطاقة: قم بتوصيل الطاقة وتحقق من اتجاه دوران المحرك. 3. فحص الصمام: Check
إجراءات التشغيل الاحترافية لصيانة مضخة الطرد المركزي تابع القراءة »
أنا. Gas Pipeline Laying 1. Gas pipelines should be equipped with anti-static and lightning grounding devices. The grounding resistance should not exceed 10Ω, and the flange connection resistance should be less than 0.03Ω. Testing should be conducted every six months. Grounding devices should be installed at the ends and bends
وضع, الحماية من التآكل وعزل خطوط أنابيب غاز الفرن العالي تابع القراءة »
Meeting rooms, activity rooms, rest rooms, locker rooms and other places are located within the area affected by the lifting and transporting of molten iron, molten steel and liquid slag. Cranes used for lifting molten iron, molten steel and liquid slag do not meet the relevant requirements for metallurgical cranes;
11 Major Hidden Hazards in Steel Industry Production تابع القراءة »
أنا. Classification and Management of Lifting Operations Grade I lifting operation: Lifting loads over 20t; loads under 20t but with complex shapes, large length-to-diameter ratio, low rigidity, or precision and valuable instruments; lifting operations under special conditions. Grade II lifting operation: Lifting operations that fall between Grade I and Grade III. درجة
لوائح إدارة السلامة لعمليات الرفع في مصنع لف الصلب تابع القراءة »
