Difference Between Push-steel Reheating Furnace and Walking Beam Reheating Furnace Push-type continuous reheating furnace relies on the pusher to complete the task of conveying material in the furnace. The billet slides on the bottom of the reheating furnace or on a slide supported by a water-cooled tube. В […]
Нагревательная печь с шагающими балками и нагревательная печь из листовой стали Продолжайте читать »
The horizontal continuous casting machine’s crystallizer, secondary cooling zone, tension leveler, cutting equipment and other equipment are in the horizontal orientation, and the center package is closely connected with the crystallizer. The center water inlet is connected to the crystallizer and has a separate ring. When the blank is drawn,
Машина непрерывного литья заготовок Продолжайте читать »
The induction furnace with frequency in the range of 150-10000 Hz is called an intermediate frequency furnace. The complete equipment of medium frequency induction furnace includes power supply and electrical control part, furnace body part, transmission device, and water cooling system. The intermediate frequency furnace is especially suitable for
Why Intermediate Frequency Furnace cannot be Turned on Normally? Продолжайте читать »
The model of high-speed wire rod mill is mainly Morgan series rolling mill, and the highest one should be Morgan 6. Production process: deformation system, speed system, temperature system. Raw materials: the products of the high-speed wire rod rolling mill can be produced from φ 5.5 to φ
Morgan Wire Rod Mill Продолжайте читать »
Compared with the hot roll, the cold roll only rolls the cold-rolled piece, which is usually cast after smelting and often needs to be forged. With the development of casting technology, the cold roll is forged. It is being implemented continuously. The cold roll has a cold rolling work roll,
What is a Cold Roll? Продолжайте читать »
